RUSH Multibeam 2

Preces nosaukums
RUSH Multibeam 2
Производитель
Martin
Ražotajs
Beļģija
Uzdot jautājumu par preci

Features

  • Powerful and intense multi-beam effect
  • Two moveable bars with narrow long-throw beams
  • 10 individually controllable 10 W RGBW LEDs
  • Electronic dimming and variable strobe
  • Master / slave function
  • Preprogrammed macrosDMX or sound activated
  • 3 & 5 pin XLR

Tech Specs

Physical

  • Length: 473 mm (18.7 in.)
  • Width: 248 mm (9.8 in.)
  • Height: 164 mm (6.5 in.)
  • Weight: 9.5 kg 21.0 lbs.)

Dynamic Effects

  • Color mixing: RGBW 
  • Color selection: 32 color presets 
  • Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout 
  • Pre-programmed effects: 12 pre-programmed macros with adjustable speed 
  • Electronic dimming: 0 - 100%

Control and Programming

  • Control options: DMX, stand-alone, master/slave 
  • DMX channels: 44 
  • Stand-alone trigger options: Music trig, auto trig 
  • Setting and addressing: Control panel with LCD display 
  • Protocol: USITT DMX512/1990

Optics

  • Light source: 10 x 10 W RGBW Cree XM-L LEDs
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Beam angle: 8°

*Figure obtained under manufacturer's test conditions

Construction

  • Color: Black
  • Housing: High-impact flame-retardant thermoplastic 
  • Protection rating: IP20

Installation

  • Mounting points: Two quarter-turn brackets for rigging clamps 
  • Location: Indoor use only, must be fastened to surface or structure
  • Orientation: Any

Connections

AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR

Electrical

AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 130 W

Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Thermal

  • Cooling: Forced air (temperature-regulated, low noise)
  • Maximum ambient temperature (Ta max.): 40° C (104° F)
  • Minimum ambient temperature (Ta min.): 0° C (32° F)
  • Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 450 BTU/hr.

Approvals

EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573 US EMC: 47 CFR Part 15 Class
A Australia/NZ: C-TICK N4241

Included Items

Power cable 1.5 m

Accessories

Cables, 16 A, for connection to power in chains
Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon input connector, 3 m (9.8 ft.): P/N 11541508
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510
Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511

Power connectors
Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805

Installation hardware

Half-coupler clamp: P/N 91602005
G-clamp (suspension vertically downwards only): P/N 91602003
Quick-trigger clamp (suspension vertically downwards only): P/N 91602007

Related Items

RUSH™ Software Uploader 1: P/N 91611399

Ordering Information

RUSH Multibeam 2™ in cardboard box: P/N 90480030